Asphalt repair

Asphalt repair

Due to traffic intensity, weather influences and aging, various types of damage can occur to asphalt. Influences such as heavy (traffic) loads, changing weather conditions and de-icing salts cause wear and aging of the asphalt pavement. As a result, damage patterns to the asphalt structures can occur, such as cracks and potholes. Prevention is better than cure, but in some cases asphalt repair cannot be avoided. At the time of asphalt damage, it is very important to repair the asphalt as soon as possible, thereby reducing the damage to the asphalt. Repair to asphalt is essential for the life of the asphalt, through asphalt repairs the damage process is reduced. 

What is asphalt repair?

The moment asphalt repair is not done in a timely manner, moisture and dirt enter the asphalt increasing the damage. Timely asphalt repairs extend the life of the asphalt, reducing the likelihood that the asphalt structure will need to be replaced. Asphalt repairs can include mortar repair or sealing of an existing asphalt pavement. In addition, repairs may include preservation treatments or repair to asphalt roads, or filling cracks and joints. In the interest of sustainability and cost reduction, it is important to repair the asphalt soon.

What does asphalt repair do? 

Because of the variety in asphalt roads, there is a variety of asphalt damages and techniques to repair asphalt damages. Asphalt damages such as cracks and joints can be repaired by bituminous joint filling. Asphalt repair can be done through a joint filler based on a modified bitumen, filling damages such as cracks and holes in the asphalt. In addition, bitumen emulsions are used to repair or seal an existing asphalt texture. In the context of asphalt repair, bituminous emulsions are used to repair fraying, cracks, cracking and touch-up of connection seams. 

Latexfalt® Slemmix

The Latexfalt Slemmix is a ready-to-use and fine slurry, based on bitumen emulsion and fillers.  The Latexfalt® Slemmix can be used for mortar repair or sealing of an existing asphalt texture. By using the Latexfalt Slemmix there is no increase in layer thickness.

  • Restore or seal an existing asphalt texture
  • Ready-to-use and fine slam

Latexfalt® Handslem

The Latexfalt Handslem is a storage-stable slurry, based on bitumen emulsion, filler and sand. The Handslem is applicable to asphalt, cement and concrete roads, which require repair or conservation treatment. The Handslem can be used for fraying, tears, crackle and touching-up connection seams.
The slam is suitable for achieve very thin top layers, without high shear stress.

  • Repair or conservation treatment of asphalt and cement concrete roads
  • Very thin top layers, without high shear stress

Latexfalt® Joint Fill JX

Latexfalt Joint Fill JX is a crack and joint filling, which is largely used for filling cracks and joints. The best recovery is obtained with damage up to 20 mm in mastic asphalt, concrete or road asphalt.
The Latexfalt Joint Fill JX contains special bitumen, which is modified with highly elastic rubber-containing fillers for an optimal bond.

  • Crack and joint filling
  • Suitable for mastic asphalt, concrete and road asphalt

Latexfalt® Joint Fill RX

Latexfalt Joint Fill RX is a modified binder which is provided with special polymers. The bitumen mixture gives optimum flexibility to low-noise joint constructions.
The binder is designed for high flexibility at low temperatures and extremely suitable for high temperatures. 

  • Modified binder
  • Optimal flexibility

Would you like to have more information about a product? Please send a request by using the Contact form.

For questions you can always contact us by phone: +31 (0)71 341 91 08 of info@latexfalt.com

Direct contact

Direct contact

Enter your contact details
preventief_wegenbouw
Service Life Extension

Service Life Extension

Freesasfalt 1 - bewerkt
Re-use [Recycling]

Re-use [Recycling]

Freesasfalt 1 - bewerkt

Re-use [Recycling]

info
Spraykote
Foundation & roofing conservation

Foundation & roofing conservation

Blok-hoofdpagina - Halffabricaten
Industrial Emulsion

Industrial Emulsion

Contact - Veel gestelde vragen
Tekst - Tegels tekst home [EN]

Which product do I need?

In our knowledge base you will find the best suitable product/application to solve your problem.

Latexfalt B.V. logo
Latexfalt B.V.
infoView the knowledge base

Copyright © 2024 Latexfalt B.V. | Site-Index | Cookies | Disclaimer | Privacyverklaring | Terms & Conditions |

Designpro.nl | Z-IM